TM 9-2350-277-20-5
REPLACE M14 NBC CABLES AND SWITCH ASSEMBLY (M1059A3 ONLY) Continued
0799 00
5.
Install clamps (6) on circuit 579A cable (1). Secure clamps (6) to bulkhead with two screws (7) and new lockwashers (5).
6.
Install circuit 579A cable (1) along existing wiring harness on side plate. Secure cable (1) to harness with three new
straps (9).
7.
Align circuit breaker and switch assembly (1) to threaded inserts under left side of traverse beam, with controls facing
front of vehicle. Secure with two screws (2) and new lockwashers (3). Do not tighten screws.
8.
Install circuit 579A lead (4) on jack (5) of circuit breaker (6).
9.
Install short cable assembly (7) on jack (8) of circuit breaker (6) and jack (9) of switch (10).
10. Install power cable assembly (11) on jack (12) of switch (10).
11. Install slots on cover (13) under two screws (2) securing switch assembly (1) to traverse beam.
0799 00-4