TM 9-2350-277-20-5
REPLACE COOLANT HEATER EXHAUST ELBOW AND PIPES — Continued
0724 00
4.
Align new gasket (7) and upper pipe (2) with exhaust grill housing. Secure with four washers (6) and screws (5).
FOLLOW-THROUGH STEPS
1.
Install air cleaner (WP 0168 00).
2.
Start coolant heater (see your -10). Check for exhaust leaks. Turn heater off.
3.
Close power plant access door (see your -10).
4.
Raise trim vane (see your -10).
5.
Start engine (see your -10).
6.
Raise and lock ramp (see your -10).
7.
Stop engine (see your -10).
END OF TASK
0724 00-3/4 blank
