INSTALLATION - TM-9-2350-277-20-5

REPLACE COOLANT HEATER EXHAUST ELBOW AND PIPES - TM-9-2350-277-20-5_413

TM-9-2350-277-20-5 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
334

TM 9-2350-277-20-5 REPLACE COOLANT HEATER FUEL PUMP — Continued 0723 00 6. Install hose (10) on elbow (1) and on tee (11) on personnel heater fuel pump (12). 7. Place clamp (13) on hull weldnut. Secure with washer (14), two new lockwashers (15), and screw (16). 8. Connect fuel pump lead (17) to circuit 402A lead (18). FOLLOW-THROUGH STEPS 1. Open heater fuel shut off valve (see your -10). 2. Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00). 3. Bleed fuel lines (WP 0679 00). 4. Start heater (see your -10). Check for fuel leaks. Turn heater off. 5. Install rear floor plate (WP 0539 00), (WP 0540 00), (WP 0541 00), (WP 0542 00), (WP 0543 00), (WP 0544 00), or (WP 0545 00). 6. Start engine (see your -10). 7. Raise and lock ramp (see your -10). 8. Stop engine (see your -10). END OF TASK 0723 00-4

Privacy Statement
Press Release
Contact