TM 9-2350-277-20-5
REPLACE PERSONNEL HEATER ASSEMBLY (M1064A3 ONLY) — Continued
0704 00
INSTALLATION
WARNING
Exhaust fumes can kill. Fumes must be vented. If the wrong heater is installed, fumes will not
be completely vented. Never substitute a “common air” heater for a “dual air” heater.
1.
Install plenum (1) on heater (2) with four new lockwashers (3) and screws (4).
2.
Install two mounts (5) on right wall mounts (6). Secure with four screws (7), three new lockwashers (8), ground strap
(9), and four new locknuts (10).
3.
Install two clamps (11) in two mounts (6).
4.
Slide clamp (12) on heater intake pipe (13) and clamp (14) on heater exhaust pipe (15). Place heater (2) and shield (16)
on mounts (5). Secure with two clamps (11).
5.
Place ground strap (9) on heater (2). Secure with two new lockwasher (17) and screw (18).
6.
Tighten clamp (14) on heater exhaust pipe (15) and clamp (12) on heater intake pipe (13).
7.
Connect heater wiring harness (19) to heater (2).
0704 00-3
