TM 9-2350-277-20-5
REPLACE PERSONNEL HEATER DUCT AND HOSES — Continued
0706 00
REMOVAL
WARNING
The OBD insulator blanket is made out of asbestos. Handle with care. Discard insulator
blanket properly as a hazardous material per local standard operating procedure. The
insulator washer takes the place of the blanket.
1.
Loosen two clamps (1). Remove hose (2) from two nipples (3). Remove clamps from hose.
2.
Loosen latches. Remove nipple (3) from duct (4) and nipple (3) from duct (5).
3.
Remove three screws (6), washers (7), shield (8), three insulator washers (9), and duct (5) from carrier.
0706 00-2
