TM 9-2350-277-20-5
REPLACE RAMP CYLINDER — Continued
0656 00
FOLLOW-THROUGH STEPS
1.
Install breather hose (WP 0666 00).
2.
Connect ramp cylinder hose (WP 0665 00).
3.
Check fluid in tank. Add fluid as needed (see your PMCS).
4.
Start engine (see your -10). Check for hydraulic leaks.
WARNING
Unlocked ramp can fall open suddenly. Personnel can be killed or injured. Do not stand behind
ramp. Keep away from ramp during testing and bleeding of hydraulic lines.
5.
Raise and lower ramp several times to bleed air from system (see your -10).
6.
Install rear floor plate (WP 0539 00).
7.
Raise and lock ramp (see your -10).
END OF TASK
0656 00-4
