TM 9-2350-277-20-4
REPLACE TRIPOD STOWAGE BRACKETS (M901A3 ONLY) — Continued
0592 00
NOTE
Flat edge of tripod tiedown cap must face springs.
5.
Install support cushion (15) and support channel (16) on floorboard. Secure with two washers (17) and screws (18).
6.
TIGHTEN TWO SCREWS (18) TO 72-84 LB-IN (8-10 N m) TORQUE.
7.
Install lower support bracket (19) on carrier. Secure with three spacers (20), new lockwashers (21), and screws (22).
8.
TIGHTEN TWO SCREWS (22) TO 72-84 LB-IN (8-10 N m) TORQUE.
9.
Install tripod plate strap (23) on lower support bracket (19). Secure with six washers (24), two washers (25), and
screws (26).
10. TIGHTEN TWO SCREWS (26) TO 50-55 LB-FT (68-75 N m) TORQUE.
11. Install two support shims (27) and lower support bracket (19) on support channel (16). Secure with two screws (28),
washers (29), and new locknuts (30).
12. TIGHTEN TWO SCREWS (28) TO 84-108 LB-IN (10-12 N m) TORQUE.
0592 00-4
