TM 9-2350-277-20-4
REPLACE SIDE ARMOR (M901A3 ONLY) — Continued
0594 00
INSTALLATION
1.
Install armor plate (12) on deck. Secure with five washers (11), new lockwashers (10), and screws (9).
2.
TIGHTEN FIVE SCREWS (9) TO 55-60 LB-FT (75-81 N m) TORQUE.
3.
Install two brackets (6) on armor plate (2). Secure with two shoulder pins (8) and new spring pins (7).
4.
Install two brackets (6) and armor plate (2) on deck. Secure with four washers (5), new lockwashers (4), and screws (3).
5.
TIGHTEN FOUR SCREWS (3) TO 35-40 LB-FT (48-54 N m) TORQUE.
6.
Install quick release pin (1) on armor plate (2).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
END OF TASK
0594 00-2
