REPLACE SIDE ARMOR (M901A3 ONLY)

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
623

TM 9-2350-277-20-4 REPLACE SIDE ARMOR (M901A3 ONLY) 0594 00 THIS WORK PACKAGE COVERS: INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Torque Wrench (WP 0926 00, Item 85) Materials/Parts Lockwasher (4) Lockwasher (5) Spring pin (2) Personnel Required Unit Mechanic References See your -10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) REMOVAL NOTE Right and left side armor are replaced the same way. Left side shown. 1. Remove quick release pin (1) and place armor plate (2) in the down position. 2. Remove four screws (3), lockwashers (4), washers (5), two brackets (6), and armor plate (2) from deck. Discard lockwashers. 3. Remove two spring pins (7), and shoulder pins (8), from brackets (6) and armor plate (2). Discard spring pins. 4. Remove five screws (9), lockwashers (10), washers (11), and armor plate (12) from deck. Discard lockwashers. 0594 00-1

Privacy Statement
Press Release
Contact