TM 9-2350-277-20-4
REPLACE MISSILE RACK (M901A3 ONLY)
0588 00
THIS WORK PACKAGE COVERS:
Removal (page 0588 00-1).
Disassembly (page 0588 00-2).
Installation (page 0588 00-3).
Assembly (page 0588 00-4).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Socket Wrench Set (WP 0926 00, Item 72)
Torque Wrench (WP 0926 00, Item 81)
Materials/Parts
Adhesive (WP 0928 00, Item 7)
Cleaning Compound (WP 0928 00, Item 17)
Cotter pin (22)
Locknut (20)
Lockwasher (2)
Personnel Required
Unit Mechanic
References
See your -10
See FM 23-23
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Missiles removed (see your -10)
REMOVAL
1.
Remove six cotter pins (1), headed straight pins (2), and 12 shim washers (3) from rack assembly. Discard cotter pins.
2.
Remove upper rack (4) and middle rack (5) from carrier.
3.
Remove 24 flanged bushings (6), if required, and remove 12 screws (7), lockwashers (8), washers (9), six clevises (10),
and shims (11) from carrier.
4.
Remove two nuts (12), washers (13), screws (14), washers (15), and shims (16) from lower rack (17). Remove lower
rack from carrier.
0588 00-1
