REMOVAL - TM-9-2350-277-20-4

REPLACE PERSONNEL SEAT, CUSHION, AND BELTS (M981A3 ONLY)

REMOVAL (cont)] - TM-9-2350-277-20-4_583

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
481

TM 9-2350-277-20-4 REPLACE PERSONNEL SEAT, CUSHION, AND BELTS (M981A3 ONLY) — Continued 0548 00 3. Remove four screws (8), washers (9), locknuts (10), and two belts (11) from personnel seat (6). Discard locknuts. 4. Remove two cotter pins (12), washers (13), washers (14), pins (15), and two support legs (16) from personnel seat (6). Discard cotter pins. INSTALLATION NOTE Support legs must be installed so the stops will face the interior of the carrier when the seat is installed. Failure to do so results in improper seat position. 1. Align two support legs (1) with mounting holes under personnel seat (2). Secure legs with two pins (3), washers (4), washers (5), and new cotter pins (6). 0548 00-2

Privacy Statement
Press Release
Contact