TM 9-2350-277-20-4
REPLACE PERSONNEL SEATS, BACKRESTS, CUSHIONS, AND BELTS (M1059A3
ONLY) — Continued
0549 00
INSTALLATION
1.
If removed, install strap (1) on backrest (2). Secure with washer (3) and new rivet (4).
2.
Place cushion (5) on seat (6). Secure with two straps (7).
3.
Place seatbelt (8) for each position on seat (6). Secure with two screws (9), washers (10), and new locknuts (11).
4.
Align two legs (12) with seat (6). Secure with two straight pins (13) and four new cotter pins (14).
5.
Align seat (6) with sponson brackets. Secure with two straight pins (15), four washers (16), and four new cotter pins (17).
6.
Align backrest (2) with sponson brackets. Secure with two screws (18) and two new locknuts (19).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
END OF TASK
0549 00-3/4 blank
