REPLACE PERSONNEL SEATS, CUSHIONS, AND BELTS (M577A3 ONLY)

INSTALLATION (cont) - TM-9-2350-277-20-4_576

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
477

TM 9-2350-277-20-4 REPLACE PERSONNEL SEATS, CUSHIONS, AND BELTS (M577A3 ONLY) 0547 00 THIS WORK PACKAGE COVERS: Removal (page 0547 00-1). Installation (page 0547 00-3). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Materials/Parts Cotter pin (6) Locknut (2) Personnel Required Unit Mechanic References See your -10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) REMOVAL NOTE There are two personnel seats in the M577A3 carriers. Remove and install both seats the same way. 1. Remove two cotter pins (1), four washers (2), two headed pins (3), and seat (4) from two brackets (5). Discard cotter pins. 2. Remove four screws (6), washers (7), and two brackets (5) from sponson. 3. Remove two locknuts (8), washers (9), screws (10), and seatbelt (11) from seat (4). Discard locknuts. NOTE Remove two washers (9) on two center positions on right seat. 4. Remove four cotter pins (12), two straight pins (13), and two legs (14) from seat (4). Discard cotter pins. 0547 00-1

Privacy Statement
Press Release
Contact