TM 9-2350-277-20-4
REPLACE PERSONNEL SEAT, CUSHION, AND BELTS (M981A3 ONLY)
0548 00
THIS WORK PACKAGE COVERS:
Removal (page 0548 00-1).
Installation (page 0548 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Cotter pin (4)
Locknut (4)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
REMOVAL
NOTE
The cushion is secured to the seat by two straps and buckled under the seat. Each strap is
inserted through two loops located under the cushion and slots in the seat.
1.
Remove seat cushion (1) by unbuckling two webbing straps (2).
2.
Remove two cotter pins (3), washers, (4), pins (5) (one on each end), and personnel seat (6) from bulkhead bracket (7).
Discard cotter pins.
0548 00-1
