TM 9-2350-277-20-4
REPLACE FLOOR PLATES (M1064A3 ONLY) Continued
0543 00
4.
Place left front floor plate (15) and right front floor plate (16) in carrier. Secure with nine lined washers (17), one screw
(18), and eight eyebolts (19).
5.
Install guard (20) on hull with screw (21), washer (22), and new locknut (23).
6.
Install screw (24) and washer (25) on guard (20).
FOLLOW-THROUGH STEPS
1.
Install personnel heater floor duct, if removed. (WP 0706 00).
2.
Start engine (see your -10).
3.
Raise and lock ramp (see your -10).
4.
Stop engine (see your -10).
END OF TASK
0543 00-3/4 blank