TM 9-2350-277-20-4REPLACE FLOOR PLATES (M58 ONLY) — Continued 0545 004. If necessary, remove four pads (9) through (11) from crossmembers by scraping.INSTALLATION1. If pads (1) through (3) were removed, apply thin coat of adhesive to roughed side of surface. Allow to dry 20-40minutes. Apply thin coat of adhesive to metal surface of hull crossmembers. Allow to dry 30-120 seconds. Install padson crossmembers and press firmly.2. Install two front plates (4)(5) and two rear plates (6)(7) to hull crossmembers.3. Install eight lined washers (8) and screws (9) to carrier hull.0545 00-2
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business