REMOVAL - TM-9-2350-277-20-4

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
393

TM 9-2350-277-20-4 REPLACE RAMP LINKAGE (M1064A3 ONLY) — Continued 0528 00 3. Loosen locknut (8). Remove clevis (7) and locknut from rod (9). Discard locknut. 4. Remove cotter pin (1), headed pin (2), and clevis (3) from cross-shaft arm (4). Discard cotter pin. 5. Remove clevis (3) from rod (5). 6. Remove rod (5) and three bumpers (6) from carrier. 7. Remove three bumpers (6) from rod (5) as rod is pulled from carrier. 8. Remove cotter pin (7), headed pin (8), spring (9), two washers (10), and latch (11) from cross shaft arm (4). Discard cotter pin. 9. Remove pin (12) from latch (11). 10. Bend back keys. Remove four screws (13), key washers (14), two support blocks (15), and arm (4) from rear bulkhead. Discard key washers. 11. Remove two screws (16), lockwashers (17), washers (18), trip plate (19), and washers (20) from hull top plate. Note position and number of washers removed. Discard lockwashers. 0528 00-2

Privacy Statement
Press Release
Contact