TM 9-2350-277-20-4REPLACE RAMP LINKAGE (M577A3 AND M1068A3 ONLY) — Continued 0527 002. Place plate (15) on hull bracket. Secure with two new key washers (16) and screws (17). Bend tabs on key washers tosecure screws.3. Install new locknut (13) on adjusting screw (14). Install screw in plate (15). Do not tighten locknut.4. Align lever (10) with hull bracket. Secure with headed pin (12) and new cotter pin (11).5. Align latch (9) with lever (10). Secure with headed pin (8) and new cotter pin (7).6. Install one support (1), key (2), arm (3), one support (1), and key (4) on arm (5). Install arm (5) in connector (6).7. Secure arm (3) on arm (5) with screw (7) and new locknut (8).8. Install two supports (1) and key (9) on arm (10).9. Align four supports (1) with hull top plate. Secure with eight new key washers (11) and screws (12). Bend tabs on keywashers to secure screws.10. Insert arm (10) in connector (6). Install two screws (13) in connector (6). Tighten screws.11. Install two new locknuts (14) on two screws (15). Install screws in hull brackets (16). Do not tighten locknuts.12. Install eyebolt (17) in clevis (18).13. Align two eyebolts (17) with arms (10) and (5). Secure with two headed pins (19) and new cotter pins (20).14. Align clevis (18) with lever (21). Secure with headed pin (22) and new cotter pin (23).0527 00-4
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business