REPAIR POWER PLANT DOOR

FOLLOW-THROUGH STEPS - TM-9-2350-277-20-4_279

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
220

TM 9-2350-277-20-4 REPAIR POWER PLANT DOOR 0472 00 THIS WORK PACKAGE COVERS: Disassemble (page 0472 00-1) Assemble (page 0472 00-2). Adjust (page 0472 00-2). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Materials/Parts Cotter pin Locknut Packing Seal Personnel Required Unit Mechanic Equipment Condition Power plant door removed from carrier (WP 0470 00) or (WP 0471 00) DISASSEMBLY 1. Remove vehicular leaf pins (1) and shield (2) from door (3). 2. Remove locknut (4), screw (5), and brace (6) from door (3). Discard locknut. 3. Remove cotter pin (7), nut (8), catch (9), and washer (10) from handle (11). Discard cotter pin. 4. Remove handle (11), washer (12), packing (13), and key (14) from door (3). Discard packing. 5. Remove screw (15) and nut (16) from door (3). NOTE Do Removal Step 6 and Installation Step 1 only if door seal is damaged. 6. Bend back door seal support and remove seal (17) from door (3). Discard seal. 0472 00-1

Privacy Statement
Press Release
Contact