INSTALLATION - TM-9-2350-277-20-3

REPLACE AUXILIARY POWER (SLAVE) RECEPTACLE (M113A3, M901A3, M1059A3, M1064A3, AND M58 ONLY)

TM-9-2350-277-20-3 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
50

TM 9-2350-277-20-3 REPLACE MASTER SWITCH (M113A3, M901A3, M1059A3, M1064A3, AND M58 ONLY) — Continued 0262 00 3. Install conductor bus (9) with attached leads on terminal (10) . Secure with new lockwasher (11) and nut (12) . 4. Install circuit 49 lead (13) and circuit 50 lead (14) on terminal (15) . Secure with new lockwasher (16) and nut (17) . 5. Install master switch panel (8) on distribution box (18) . Secure with eight screws (19) , washers (20) , and new locknuts (21) . 6. Connect circuit 37 lead (22) to connector (23) . FOLLOW-THROUGH STEPS 1. Install warning light panel assembly(WP 0291 00). 2. Connect infrared power supply cable to dummy connector (see your –10). 3. Connect battery ground strap (WP 0337 00). 4. Turn MASTER SWITCH ON (see your –10). 5. Check that MASTER SWITCH ON indicator light comes ON (see your –10). 6. Turn MASTER SWITCH OFF (see your –10). END OF TASK 0262 00-3/4 blank

Privacy Statement
Press Release
Contact