FOLLOW-THROUGH STEPS - TM-9-2350-277-20-3

INSTALLATION (cont) - TM-9-2350-277-20-3_479

REPLACE BATTERY TO MASTER SWITCH LEAD (CIRCUIT 6) (M1064A3 ONLY)

TM-9-2350-277-20-3 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
392

TM 9-2350-277-20-3 REPLACE BATTERY TO MASTER SWITCH LEAD (CIRCUIT 6) (M577A3 AND M1068A3 ONLY) — Continued 0357 00 9. Install circuit 6 lead (2) in battery box (10). 10. Install screw (11), washer (12), all leads (13), and nut (14) on battery terminal (15). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0338 00). 2. Install battery access cover (see your -10). 3. Turn MASTER SWITCH ON to check that circuit 6 lead is installed right. MASTER SWITCH ON light should come on (see your -10). 4. Start engine (see your -10). 5. Raise and lock ramp (see your -10). 6. Stop engine (see your -10). END OF TASK 0357 00-6

Privacy Statement
Press Release
Contact