TM 9-2350-277-20-3
REPLACE WARNING PANEL LIGHTS Continued
0294 00
NOTE
Do not disconnect more than one light at a time. Mark each lead to make sure you reconnect to
correct contacts. See wiring diagrams at the end of this manual.
2.
If required, remove light assembly (4).
a.
Disconnect circuit lead (6) from light assembly (4).
b.
Remove two screws (7), lockwashers (8), and light assembly (4) from warning lights panel. Discard lockwashers.
INSPECTION-ACCEPTANCE AND REJECTION CRITERIA
1.
Check light bulb. See troubleshooting (WP 0038 00). Replace bad light bulb.
Check light assembly. See troubleshooting (WP 0038 00). Replace bad light assembly.
0294 00-2