TM 9-2350-277-20-1
NO AC POWER FROM INVERTERS (M1068A3 ONLY)Continued
0109 00
3Y
1. Install cable W5 leads on terminal block TB2.
2. Remove cable W15 plugs (1) from inverters IN1 (2) and IN2 (3).
3. Install inverter test solo plug (4) in inverter IN1 (2).
4. Set MASTER SWITCH to ON.
5. On inverter front panel (5), set POWER switch (6) to ON and
momentarily move RESET switch (7) up.
6. Measure voltage between sockets A and B of cable W5 plug P6
(8).
7. Does multimeter read 110 volts AC or more?
YES
NO
3YN
1. Faulty inverter IN1 (with solo plug
installed). Beyond unit maintenance
repair.
2. Notify supervisor.
0109 00-5