NO DC POWER FROM TENT INTERFACE PANEL A5 (M1068A3 ONLY)Continued

NO DC POWER FROM TENT INTERFACE PANEL A5 (M1068A3 ONLY)Continued - TM-9-2350-277-20-1_452

TM-9-2350-277-20-1 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
342

TM 9-2350-277-20-1 NO DC POWER FROM TENT INTERFACE PANEL A5 (M1068A3 ONLY)—Continued 0092 00 Y 1. Turn MASTER SWITCH to OFF (see your -10). 2. Remove cable W32, plug P6 (1) from TENT INTERFACE panel jack J7 (2). 3. Measure resistance between pin A on plug P6 (1) and pin A on plug P16 (3) of cable W32. 3. 3. Measure resistance between pin B on plug P6 (1) and pin B on plug P16 (3) of cable W32. 4. Does multimeter read 0 ohms for each set of measurements? YES NO YN 1. Replace cable W32 (WP 0848 00). 2. Verify no faults found. 2Y 1. Faulty Tent Interface Panel. Beyond unit maintenance repair. 2. Notify supervisor. 0092 00-3

Privacy Statement
Press Release
Contact