12-2
Change 4
TM 9-2350-267-34
REPAIR
A Insert sandpaper (10) (item 47, Appx B) under brush holder (11) and
rotate armature.
B Remove sandpaper (10) and clean residue.
INSTALLATION
A Install brushes (9) into brush holder (11) and check position.
B Install lead wire (6) with screw (5).
C Remove stiff wire (7) and release retainer springs (8).
D Install brush guard (4) and properly position dust cover band (3).
E Secure dust cover band (3) with screw (2) and new lockwire (1).