HYDRAULIC CLUTCH REPAIR (CONTINUED)

HYDRAULIC CLUTCH REPAIR (CONTINUED) - TM-9-2350-267-34_259

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
228

11-10 TM 9-2350-267-34 HYDRAULIC CLUTCH REPAIR (CONTINUED) CAUTION When placing piston (18) in vise, DO NOT OVERTIGHTEN vise. Use soft vise inserts and rags to protect piston. Grip piston only enough to prevent piston from slipping. Do not nick or distort piston. L Secure piston (18) in a vise, and use a brass drift to gently tap assembled pressure ring (15) and bearing (19) from piston (18). NOTE Make sure pressure ring is not clamped by vise. CAUTION DO NOT remove bearing unless replacing with new bearing. Removal will destroy bearing. M Pry bearing (19) from pressure ring (15). N Remove retaining ring (20) from piston housing (16). NOTE Tap bearing from inside of housing. O Use a brass drift to tap bearing (21) from housing (16). TA309846

Privacy Statement
Press Release
Contact