HYDRAULIC CLUTCH REPAIR (CONTINUED)
G Install two new packings (12 and 13) on piston (14).
H Insert pressure ring (11) and bearing (10) as an assembly, into
piston (14).
CAUTION
Do not damage packings when installing piston
assembly into housing.
I
Insert piston (14) into housing (15).
K
L
M
Insert assembled body (18) and shaft (17) into housing (15)
and pressure ring (11). Tap in with a hammer and a brass
drift. Aline body (18) with pressure ring (11).
Install snapring (19) on body (18).
Install snapring (20) on shaft (17).
11-13
TM 9-2350-267-34