Z
Install exhaust outlet (53) on transmission access left door (51) using three
screws (49), three flat washers (50) and gasket (52) retained from heater
exhaust cover removal (step Y).
AA Install exhaust outlet plug (54) in exhaust outlet (53).
CAUTION
Remove plug from exhaust outlet before
operating winterization kit to avoid
damaging vehicle.
AB Remove three screws (55) from engine coolant pump inlet adapter (56)
and discard screws.
AC Position pump (57) and adapter against base bracket (58) so that pump
suppressor (59) is 30° forward from a vertical position (to clear hull front
plate) and install three No. 8-32 x 5/8-inch screws (60) and three lockwashers
(61).
AD Place curved bracket (62) over pump and secure to base bracket with two
1/4-20 x 7/8-inch screws (63), two lockwashers (64) and two nuts (65).
10-2.7
Change 4
TM 9-2350-267-34
