WINTERIZATION KIT: INITIAL INSTALLATION (CONTINUED)

WINTERIZATION KIT: INITIAL INSTALLATION (CONTINUED) - TM-9-2350-267-34_215

WINTERIZATION KIT: INITIAL INSTALLATION (CONTINUED) - TM-9-2350-267-34_217

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
186

10-2.8 Change 4 TM 9-2350-267-34 NOTE Install lockwashers (68) on any two screws for grounding pump on hull. Install assembled pump (57) and bracket (58) on hull front plate (22) with four 1/4-20 x 5/8-inch screws (66), two flat washers (67) and two lockwashers (68). Place hose clamp (69) over free end of 5/8 ID x 18-inch long hose (37), connect hose to coolant pump outlet (70) and tighten clamp. Cut hose (37) as required. AG AH AI AJ Install elbows (71) and (72) in fuel filter (73) inlet and outlet openings. Install fuel filter (73) with elbows (71) on bracket (74) with two No. 10- 32 x 1-3/4-inch screws (75), two flat washers (76) and two nuts (77). Install adapter (79) into inlet side of fuel pump. Install adapter (78) into outlet (82) of fuel pump. Install two shock mounts (83) with two nuts (84) and two flat washers (85) on bracket (74). Install electric fuel pump (86) on shock mounts using two nuts (87) and two lockwashers (88) to secure pump, ground strap (89) and pump suppressor (90). Install fuel tube (91) between filter outlet elbow (72) and fuel pump body inlet (81).

Privacy Statement
Press Release
Contact