10-2.2
Change 4
TM 9-2350-267-34
WINTERIZATION KIT: INITIAL INSTALLATION (CONTINUED)
I
Place grommets (15) (hidden) on battery heater (16) inlet and outlet tubes,
and install heater through front batteries access opening (5). Insert tube
grommets in front winterization box (3) cut-outs.
NOTE
Screws (18) and lockwashers (19) were removed in step
B. Four 3/8-16 x 7/8-inch screws and 16 flat washers are
provided for shimming adjustment of support to make
it level. Use of shims (washers) should be kept to a
minimum.
J
Install battery supports (17) and attach supports and heater (16) to sponson
with eight furnished 3/8-16 x 3/4-inch screws (18) and eight lockwashers
(19).
NOTE
Hold-down bars, bolts, washers and nuts were removed
in step B.
K Place four batteries on two battery supports with battery terminals positioned
as illustrated. Secure with hold-down bars, bolts, washers, and nuts.