ASSEMBLY - TM-9-2350-267-34

STE/ICE RESISTOR BOX DISASSEMBLY AND ASSEMBLY

CHAPTER 7 MAINTENANCE PROCEDURES FINAL DRIVE AND TRACK SUSPENSION ASSEMBLIES

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
141

6-36 Change 4 All data on pages 6-37 thru 6-39/(6-40 blank) deleted. TM 9-2350-267-34 STE/lCE RESISTOR BOX DISASSEMBLY AND ASSEMBLY(CONTlNUED) ASSEMBLY A B C D E F G Secure terminal board (7) and marker strip (23) to panel (16) with four screws (19), four flat washers (20), four lockwashers (21) and four nuts (22). Install panel (16) with terminal board (7) in box housing (4) with four screws (17) and four lockwashers (18). Install five terminal lugs (15), three fixed resistors (15.1) and three bus connectors (14) with eight terminal screws (6). Install new gasket (12) and STE/ICE control box wiring harness (13) in box housing (4) with four screws (8), four flat washers (9), four lockwashers (10) and four nuts (11). Install 12 terminal leads (5) on terminal board (7) with eight terminal screws (6). Install cover (3) on box housing (4) and secure by hooking four retainers (2). Install four screws (1) in retainers (2).

Privacy Statement
Press Release
Contact