STE/ICE RESISTOR BOX DISASSEMBLY AND ASSEMBLY
DISASSEMBLY
A
Remove four screws (1) and unhook four retainers (2) securing cover (3) to
box housing (4).
B
Remove cover (3).
C
Tag and remove 12 terminal leads (5) by removing eight terminal screws (6)
from terminal board (7).
D
Remove four screws (8), four flat washers (9), four lockwashers (10) and four
nuts (11) to remove gasket (12) and STE/ICE control box wiring harness (13)
from box housing (4).
E
Remove three bus connectors (14), five terminal lugs (15) and three fixed
resistors (15.1), by removing eight terminal screws (6) from terminal board
(7).
F
Remove four serews (17) and four lockwashers (18) securing panel (16) to box
housing (4).
G
Remove panel (16) with terminal board (7).
H
Remove four screws (19), four flat washers (20), four lockwashers (21) and
four nuts (22) to remove terminal board (7) and marker strip (23) from panel
(16).
6-35
Change 4
TM 9-2350-267-34
