CIRCUIT BREAKER PANELS AND CIRCUIT BREAKERS: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION (CONTINUED)
ASSEMBLY
Equipment Condition:
Install circuit breakers (2) to panels (3) by installing two nuts (7),
two screws (8), two new lockwashers (9) and two flat washers (10).
Battery ground cables disconnected (6-44).
INSTALLATION
MASTER switch OFF.
Portable instrument panel removed (p 6-19).
A Install four screws (4), four new lockwashers (5), two flat
Driver’s instrument panel removed (p 6-19).
washers (6) and two panels (3) to driver’s compartment.
REMOVAL
B
Install 26 electrical leads (1) to 13 circuit breakers (2).
A Disconnect 26 electrical leads (1) from 13 circuit breakers (2).
B Remove two panels (3) from driver’s compartment by remov-
ing four screws (4), four lockwashers (5) and four flat washers
(6). Discard lockwashers.
DISASSEMBLY
Remove circuit breakers (2) from panels (3) by removing two nuts
(7), two screws (8), two lockwashers (9) and two flat washers (10).
Discard lockwashers.
TA57165
6-55
Change 2
TM 9-2350-267-20
