ACCESSORY CONTROL BOX: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION (CONTINUED)
C
D
E
F
G
H
I
J
Install light bracket (39) in accessory control box (6) with washer (38) and nut
(37). Connect wire (34) with washer (36) and screw (35).
Install indicator panel (33), indicator light cap (29), lamp (30), gasket (31) and
hexnut (32) on light bracket (39) in accessory control box (6).
Install two panel light lamps (27) and two gaskets (28).
Connect two leads on ventilator/blower switch (26) between terminals 4 and 3,
and 6 and 1.
Install three switches (26) and switch guard (26.1) and three hexnuts (25) to
accessory control box (6).
Install screw (22), two new lockwashers (23) and nut (24).
Install six screws (18), six flat washers (19), six new lockwashers (20), six nuts
(21) and three circuit breakers (17).
Connect six electrical connectors (16) to circuit breakers (17).
TM 9-2350-267-20
6-27
Change 4
