SUPPORT ASSEMBLY, UPPER CROSSMEMBER AND SUPPORT BRACKETS: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION

HYDRAULIC MOTOR AND DRIVE SPROCKET: REMOVAL AND INSTALLATION (CONTINUED) - TM-9-2350-267-20_1140

SUPPORT ASSEMBLY, UPPER CROSSMEMBER AND SUPPORT BRACKETS: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION (cont)

TM-9-2350-267-20 Carrier Ammunition Tracked M992 (2350-01-110-4660) Manual
Page Navigation
1052

SUPPORT ASSEMBLY, UPPER CROSSMEMBER AND SUPPORT BRACKETS: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION E!EEEl Lubricating oil (item 35, Appx D) Zinc chromate paste (item 46, Appx D) Two Carrier assembly and motor support bracket removed (p 12-34). A Support upper crossmember (1) and remove four screws (2) and four lockwashers (3) from each of two support brackets (4). Discard lockwashers. B Remove upper crossmembers (1) from vehicle and remove two support brackets (4). C Slide support assembly (5) from crossmember (1). DISASSEMBLY A Remove two cotter pins (6) from each of eight bearing shafts (7). Discard cotter pins. B Remove eight bearing shafts (7) from support assembly (5). Remove eight roller bearings (8). 12-44.1 Change 4 TM 9-2350-267-20

Privacy Statement
Press Release
Contact