STACKER BAR ASSEMBLY: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION

.APU COMPARTMENT ACCESS PLATE AND CAP ASSEMBLY: REMOVAL AND INSTALLATION

CHAPTER 13 AUXILIARY POWER UNIT (APU) MAINTENANCE INSTRUCTIONS

TM-9-2350-267-20 Carrier Ammunition Tracked M992 (2350-01-110-4660) Manual
Page Navigation
1056

STACKER BAR ASSEMBLY: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION REMOVAL A Disconnect bar assembly (1) from stacker motor support bracket by pulling quick-disconnect pin (2). B Loosen jam nut (3) from flexible rod end (4). C Remove nut (3) from flexible rod end (4). D Turn nut (5) to remove flexible rod end (4) from left rear canister compartment cross member. DISASSEMBLY A Remove disconnect pin (2) from bar (1) by removing screw (8), flat washer (9), lockwasher (10) and nut (13). B Remove chain (12) from disconnect pin by bending connecting link (11). ASSEMBLY Reverse order of disassembly procedures. INSTALLATION Reverse order of removal procedures. TA310245 12-45/(12-46 blank) TM 9-2350-267-20

Privacy Statement
Press Release
Contact