OPERATION OF DRIVING LIGHTS AND DOME LIGHTS
TM 9-2350-267-10
Operation of Dome Light
1. For blue/green lamp ON, turn switch
lever (1) fully clockwise.
2. For white lamp ON, press safety
latch (2) and turn switch lever (1)
counterclockwise past stop.
3. For both lamps OFF, position switch
lever (1) in center position.
Operation of Light Switch Assembly
WARNING
To avoid eye Injury, avoid looking Into blackout infrared
headlights. To check for operation, hold hand overhead-
light lens; if blackout headlight is operating, heat will be
felt.
The following panels show which lamps are turned on by different positions of main
light switch.
1.
2.
Push up safety switch (3) to
release main light switch
(4). Release safety switch
after main light switch is
properly positioned.
Push up on instrument
panel light switch (5) to turn
on instrument panel lamps.
NOTE
Infrared lights operate on
both high and low beams.
2-89