6.
7.
8.
Remove two cap
and locknuts (3)
Discard locknuts.
screws (1), flat washers (2),
from battery box cover (4).
Place refill kit mounting bracket (5) on
battery box cover (4). Secure with two cap
screws (1), flat washers (2), and new
locknuts (3) .
Install strap assembly (6) on bracket (5).
9.
10.
11.
12.
Remove five
washers (8)
Place alarm
TM 9-2350-261-34
cap screws (7) and flat
from overhead.
unit mounting bracket (9) on
overhead. Secure with five flat washers (8)
and cap screws (7). Tighten screws to
264-288 in-lb (30-33 Nm) torque. Use
torque wrench (item 110).
Install four machine screws (10), flat
washers (11 ), and locknuts (12) in openings
in alarm part of bracket (9).
Install strap assembly (13) on bracket (9).
GO TO NEXT PAGE
23-3