TM 9-2350-261-34
45. Position plate (1) and gasket (2) on hole on
outside of hull. Secure with four screws (3),
new lockwashers (4), and washers (5).
W A R N I N G
To prevent injury to person-
nel, verify that all grenades
have been removed from
smoke grenade discharger
before
removing
components.
46. Hold left smoke grenade wiring harness con-
nector (6) up to plate (1) and secure with
jamnut (7). Have helper assist.
47.
48.
49,
50.
51.
Connect wiring harness (6) to hull connec-
tor (8).
Install mounting base (9) on hull. Pass the
loose end of the wiring harness (6) through
the opening in the base (9). Secure with
three screws (10) and washers (11).
Install brush guard (12) on hull. Secure
with four screws (13), new lockwashers (14)
and washers (15).
Position smoke grenade discharger (16)
connect wiring harness (6) to connector
and
on
discharger.
Install discharger (16) on mounting
and secure with three washers (17)
screws (18).
base (9)
and
GO TO NEXT PAGE
6-63
