TM9-2350-261-34
REPLACE TRANSMISSION
DESCRIPTION
This task rovers: Remove (page 3-14).
Install (page 3-15).
INITIAL SETUP
T o ok
Personnel Required:
General Mechanics Tool Kit (Item 35, App B)
Track Vehicle Repairer 63H10
Adapter (Item 1, App B)
References:
Materials/Park
See your LO
Antiseize compound (Man 8, App C)
see your -20
Key wader (2)
Packing (2)
Equipment Conditions:
Sealing compound (item 70, App C)
Transmission oil drained (see your LO)
Sealing compound primer (Item 74, App C)
self-locking nut
Power plant removed (see your 20)
Power plant blocked (page 3-2)
Transmission removed from transfer gearcase
(page 3-4)
REMOVE
CAUTION
Cap or cover openings where fuel,
coolant lines or fittings have
removed.
1. Remove two elbows (1) and packings
transmission. Discard packings.
2.
3.
4.
5.
6.
oil, or
been
(2) from
Disconnect vent tube (3) from vent tube
elbow (4).
Remove vent tube elbow (4) from
transmission.
Remove two screws (5), key washers (6), and
crossshaft bracket (7) from transmission.
Discard key washers.
Remove locknut (8), screw (9), and throttle
valve arm (10) from transmission shaft (11).
Discard locknut.
Remove nut (12), screw (13), and range selec-
tor arm (14) from transmission shaft (11).
3-14