TM 9-2350-261-20-4
REPLACE POWER CONTROL ENCLOSURE ASSEMBLY A1 (M1068 ONLY) -- Continued
0731 00
INSTALLATION
1.
Install power control enclosure (1) on inverter housing (2). Secure with eight washers (3) and screws (4). Have helper
assist.
2.
Connect all cables/connectors (5) to left/right sides of power control enclosure (1).
3.
Install bracket (6) on power control enclosure (1). Secure with two new lockwashers (7) and screws (8).
FOLLOW-THROUGH STEPS
1.
2.
3.
Connect battery ground lead (WP 0294 00).
END OF TASK