TM 9-2350-261-20-4
REPLACE/REPAIR SMOKE GENERATOR FUEL FILTER/WATER
SEPARATOR (M1059 ONLY)
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Personnel Required
Maintenance Level
Unit Mechanic
Unit
Equipment Condition
Tools and Special Tools
Engine stopped (see your -10)
Carrier blocked (see your -10)
Materials/Parts
Battery ground lead disconnected (WP 0294 00)
Filter element gasket
Lockwasher (2)
REMOVAL
NOTE
There are two fuel filter/water separators. One is located on the left side of the carrier and the
other on the right. Both are removed and installed the same way. Only one is shown.
Plug fuel hoses after removing to prevent leakage.
1.
Remove fuel hose (1) from inlet tube adapter (2) on fuel filter/water separator (3).
2.
Remove fuel hose (4) from outlet tube adapter (5) on fuel filter/water separator (3).
3.
Remove two screws (6), nuts (7), washers (8), lockwashers (9), and fuel filter/water separator (3) from armor shield