TM 9-2350-261-20-4
REPLACE ELECTRONIC EQUIPMENT HEATER BATTERY-TO-CONTROL
0631 00
BOX LEAD (M577A2 ONLY) -- Continued
7.
Remove screw (12), two clamps (13) and (14), three lockwashers (15), and ground lead (16) from bulkhead weldnut.
Discard lockwashers.
8.
Remove clamp (10) and clamp (14) from lead (2). Remove lead from carrier.
INSTALLATION
1.
Install clamp (1) and clamp (2) on circuit 400A lead (3).
2.
Place ground lead (4), three new lockwashers (5), and two clamps (1) and (6) on bulkhead weldnut. Secure with screw
(7).
3.
Place two clamps (2) and (8) on bulkhead weldnut. Secure with screw (9).
