TM 9-2350-261-20-4
REPLACE ELECTRONIC EQUIPMENT HEATER BATTERY-TO-CONTROL
0631 00
BOX LEAD (M577A2 ONLY) -- Continued
4.
5.
Connect lead (3) to control box lead (10).
6.
Secure lead (3) to circuit 6 lead (11) with two straps (12).
7.
Install new grommet (13) and lead (3) in battery box (14).
Install lead (3) on front battery positive terminal (15). Secure with nut (16).
8.
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
Start heater (see your -10). Check that circuit 400A lead is installed properly. Turn heater off.
2.
END OF TASK
0631 00-3/4 blank