TM 9-2350-261-20-4
REPLACE ELECTRONIC EQUIPMENT HEATER BULKHEAD TO HEATER
0629 00
HOSES (M577A2 ONLY) -- Continued
FOLLOW-THROUGH STEPS
1.
Open heater fuel shutoff valve (see your -10).
2.
Connect battery ground lead (WP 0294 00).
3.
Bleed fuel line (WP 0599 00).
4.
Start heater (see your -10). Check pump for fuel leaks. Turn heater off.
5.
Install power plant rear access panel (WP 0433 00).
6.
Install right front floor plate (WP 0436 00).
7.
Install personnel heater duct (WP 0617 00).
8.
Raise and lock ramp (see your -10).
9.
Stop engine (see your -10).
END OF TASK
0629 00-6