TM9-2350-261-20-23.4.5.6.Remove seal (1), inner bearing (2), and outer9.bearing (3) from hub (4). Discard seal.Remove grease fitting (5) and relief valve (6)10.from hub (4).If damaged, remove bolt(s) (7) from hub (4).Discard damaged bolt(s).11.If damaged, remove bearing cups (8 and 9)13. Install seal (17) in hub (12). Use spacerring.from hub (4).12.N O T EBearings and cups are replaced as a set.C L E A N , I N S P E C T , A N D R E P L A C E7. Clean and check bearings (TM 9-214). Re-place bad bearings and cups.I N S T A L L8. If removed, install bearing cups (10 and 11)in hub (12). Use replacer.If removed, install new bolt(s) (13) inhub (12).Apply light coat of sealing compound tothreads of relief valve (14) and grease fit-ting (15). Install valve and fitting inhub (12).Pack inner bearing (16) with grease. Installbearing in rear of hub (12).Apply light coat of sealing compound toouter surface of new seal (17).22-18
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business