TM 9-2350-261-20-2
REPLACE DIFFERENTIAL GASKET
DESCRIPTION
This task covers: Remove (page 21-23).
Install (page 21-24).
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 30, App D)
Socket (Item 89, App D)
Torque Wrench (Item 95, App D)
Materials/Parts:
Antiseize compound (Item 4, App C)
Dry cleaning solvent (Item 13, App C)
Key washer (14)
Wiping rag (Item 61, App C)
Gasket
Personnel Required:
Unit Mechanic
References
See your -10
See your LO
Equipment Conditions:
Engine Stopped. See your -10.
Carrier Blocked. See your -10.
Front Power Plant Engine Access Door Open:
See your -10.
R E M O VE
1. Remove dipstick (1) from differential
cover (2).
NOTE
Damage to differential may occur if dirt
or debris falls into it while cover is off.
Before differential cover is removed, all
dirt and debris must be removed from
around it and power plant door.
2. Remove all dirt and debris from around and
above differential cover (2).
3. Straighten tabs on 14 key washers (3).
4. Remove 14 screws (4) key washers (3),
differential cover (2), and gasket (5) from
differential gearbox (6) Discard gasket and
key washers.
GO TO NEXT PAGE
Change 4
21-23
