TM9-2350-261-20-2
7.
8.
9.
10.
11.
12.
13.
14.
Apply a thin even coat of sealing compound
to cleaned external threads of elbows (1
and 2).
Install elbow (2) in differential gearbox (3).
Install elbow (1) in differential (4).
Connect differential oil hose (5) to
elbows ( 1 and 2).
Apply antiseize compound to external
threads of screw (6).
Install oil hose (5) on differential (3) with
clamp (7) and washer (8) secure with screw
(6). Tighten screw (6) to 252–300 lb-in
( 28–34 N•-m) torque, Use torque wrench.
Install circuit 328 lead (9) and oil hose (5)
together with two clamps (10 and 11), and
secure with screw (12) and
new locknut (13).
Check differential oil level
(see your LO). Add oil if needed.
W A R N I N G
Loose clothing is dangerous
around moving belts and
pulleys. You could get bad-
ly hurt if your clothes get
caught in moving parts.
15. Start engine (see your -10). Check for leaks.
F O L L O W - T H R O U G H S T E P S
1. Engine stopped (see your -10).
2. Close power plant front access door
(see your –10).
3, Raise trim vane (see your –10).
END OF TASK
21-13
