TM 9-2350-261-20-2
R E P L A C E T E L E P O S T A N D C O V E R
INITIAL SETUP
Tools:
References:
General Mechanics Tool Kit (Item 30, App D)
see your -10
Materials/Parts:
Equipment Conditions:
Gasket (8)
Engine stopped (see your -10)
Carrier blocked (see your -10)
Personnel Required:
Ramp lowered (see your -10)
Unit Mechanic
1.
2.
3.
Remove two screws (1), retainer strip (2),
and rubber shield (3) from hull mount.
Remove eight teleposts (4), washers (5), and
gaskets (6) from four posts (7). Discard
gaskets.
Remove four posts
hull.
INSTALL
4.
5.
6.
(7) and
(8) from
Install four insulators (8) and posts (7) in
Install eight new gaskets (6), washers (5),
and teleposts (4) on each end of four
posts (7).
Install rubber shield (3) on hull mount. Se-
cure with retainer strip (2) and two
Screws (1).
FOLLOW-THROUGH STEPS
1. Start engine. Raise and lock ramp
2. Stop engine (see your -10).
(see your -10).
END OF TASK
17-8
insulators
hull.
REMOVE