TM 9-2350-261-20-2
CLEAN, INSPECT, AND REPLACE
10.
5.
6.
7.
Check leads. Replace frayed, cracked, or
broken leads (page 14-3).
11.
Check connectors. Replace cracked or broken
connectors (page 14-3).
12.
Inspect gasket on flange of distribution box.
Replace if damaged.
INSTALL
8.
9.
Place circuit breaker
box (2). Secure with
nuts (4).
Place circuit breaker
(2). Secure with two
(1) in distribution
two screws (3) and
(5) in distribution box
screws (3) and nuts (4).
Connect circuit 10 lead (6) and circuit 37A
lead (7) to circuit breaker (1).
Connect circuit 37B lead (8) and circuit 10
lead (9) to circuit breaker (5).
Place panel (10) on distribution box (2).
Secure with eight screws (11), washers (12),
and new locknuts (13).
FOLLOW-THROUGH STEPS
1. Connect battery ground lead (page 13-2).
3. Turn MASTER SWITCH OFF (see your -10).
2. Turn MASTER SWITCH ON. Check for
power at utility outlet receptacles
(page 3-122).
END OF TASK
17-12